Welding Equipment Essentials Andover MN

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program.

Paramount Auto Service
(763) 260-7018
11438 Jefferson Ct
Champlin, MN
R & S Automotive
(651) 317-8401
38 W. Woodlyn Ave
Little Canada, MN
American Tire & Auto
(763) 754-1670
10857 University Avenue Northeast
Minneapolis, MN
First Transit
(612) 306-2086, 001-2004
3204 Como Avenue
Minneapolis, MN
Auto Value
(651) 464-4046
107 12th Street Southwest
Forest Lake, MN
Act's Automotive Repair
(763) 244-8786
620 Lake Street North
Forest Lake, MN
Firestone Complete Auto Care - Blaine
(763) 786-5422
8630 University Avenue Northwest
Minneapolis, MN
Coon Rapids Goodyear
(763) 422-8025
11190 Crooked Lake Boulevard Northwest
Minneapolis, MN
Champlin Sinclair
(763) 421-6494, 001-2004
120 Curtis Road
Champlin, MN
Safelite Auto Glass
(888) 820-2558
8096 Brooklyn Blvd
Minneapolis, MN
Data Provided by:
 

Welding Equipment Essentials

If you expect your welding equipment to last longer and perform better, preventative maintenance is a must.

10/1/2001

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program. To work efficiently, each type of welding unit has specific requirements. Here's a quick checklist:

Plasma Cutters

  • Plasma cutters need an unrestricted flow of clean, dry air to the torch, so be sure to change the regulator/moisture trap filter on a regular basis.
  • Inspect the torch cable periodically to make sure all connections are tight and that the cable the air flows through hasn't been crushed or damaged.
  • Change the consumables in the torch when they're damaged or worn out.

TIG Welders

  • If you have a water-cooled TIG torch, be sure you're using the correct torch coolant. It's also important to change the coolant based on the manufacturer's recommended schedule.
  • Check for coolant leaks. Leaks at the torch require immediate attention to reduce the potential for electric shock.
  • If your TIG welder has a high-frequency start, watch for erratic performance from the high-frequency feature. When was the last time you checked the gap on the high-frequency points? Check the operator's manual for your specific welder, but remember that this service is best performed by a qualified repairer.

MIG Welde...

Click here to read the rest of the article at BodyShop Business

BodyShop Business is
a Babcox publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874
Advertise      Contact Us      Subscribe      Article Index      Privacy/Terms of Use