Welding Equipment Essentials Atlanta GA

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program.
Kevin's Mobile Repair - Chrysler, Dodge and Jeep Repair Only!
(678) 743-1960
Metro Atlanta area
Norcross, GA
Safelite Auto Glass
(888) 820-2558
3130 Peachtree Dr NE
Atlanta, GA
Safelite Auto Glass
(888) 820-2558
122 E Lake Dr
Decatur, GA
Safelite Auto Glass
(888) 820-2558
467 N Indian Creek Dr
Clarkston, GA
Safelite Auto Glass
(888) 820-2558
2189 Clifton Springs Way
Decatur, GA
Goodyear Tire & Gemini Auto Care Center
(404) 352-0001, 001-2004
1921 Howell Mill Road NW
Atlanta, GA
Safelite Auto Glass
(888) 820-2558
2204 Lavista Rd NE
Atlanta, GA
Safelite Auto Glass
(888) 820-2558
5340 Roswell Rd NE
Atlanta, GA
Safelite Auto Glass
(888) 820-2558
1732 Powers Ferry RD SE
Marietta, GA
Safelite Auto Glass
(888) 820-2558
6087 Roswell Rd NE
Atlanta, GA
Data Provided by:
 

Welding Equipment Essentials

If you expect your welding equipment to last longer and perform better, preventative maintenance is a must.

10/1/2001

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program. To work efficiently, each type of welding unit has specific requirements. Here's a quick checklist:

Plasma Cutters

  • Plasma cutters need an unrestricted flow of clean, dry air to the torch, so be sure to change the regulator/moisture trap filter on a regular basis.
  • Inspect the torch cable periodically to make sure all connections are tight and that the cable the air flows through hasn't been crushed or damaged.
  • Change the consumables in the torch when they're damaged or worn out.

TIG Welders

  • If you have a water-cooled TIG torch, be sure you're using the correct torch coolant. It's also important to change the coolant based on the manufacturer's recommended schedule.
  • Check for coolant leaks. Leaks at the torch require immediate attention to reduce the potential for electric shock.
  • If your TIG welder has a high-frequency start, watch for erratic performance from the high-frequency feature. When was the last time you checked the gap on the high-frequency points? Check the operator's manual for your specific welder, but remember that this service is best performed by a qualified repairer.

MIG Welde...

Click here to read the rest of the article at BodyShop Business

BodyShop Business is
a Babcox publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874
Advertise   •   Contact Us   •   Subscribe   •   Article Index   •   Privacy/Terms of Use