Welding Equipment Essentials Denver CO

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program.

B's Auto Inc
(720) 306-7840
1236 E Hampden Ave
Englewood, CO
Arvada Auto Tech
(720) 763-8226
5395 Marshall St
Arvada, CO
DIA Auto Service
(720) 949-7883
7680 Pena Blvd
Denver, CO
Safelite Auto Glass
(303) 839-5777
1225 Lincoln St
Denver, CO
4X4 Planet
(303) 765-5337
176 South Broadway
Denver, CO
Roos Only - Subaru's Only
(720) 949-7351
3395 S Federal Blvd
Denver, CO
Randy's Tire & Auto
(720) 249-5285
1059 W Littleton Blvd
Littleton, CO
Autotek Auto Repair
(720) 306-7751
7939 E Arapahoe Rd
Greenwood Village, CO
Mancinelli's Service & Repair, Inc.
(303) 778-9761, 001-2004
375 Logan Street
Denver, CO
Perry and Terry Collision Center
(303) 629-1711, 001-2004
621 West 8th Avenue
Denver, CO
Data Provided by:
 

Welding Equipment Essentials

If you expect your welding equipment to last longer and perform better, preventative maintenance is a must.

10/1/2001

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program. To work efficiently, each type of welding unit has specific requirements. Here's a quick checklist:

Plasma Cutters

  • Plasma cutters need an unrestricted flow of clean, dry air to the torch, so be sure to change the regulator/moisture trap filter on a regular basis.
  • Inspect the torch cable periodically to make sure all connections are tight and that the cable the air flows through hasn't been crushed or damaged.
  • Change the consumables in the torch when they're damaged or worn out.

TIG Welders

  • If you have a water-cooled TIG torch, be sure you're using the correct torch coolant. It's also important to change the coolant based on the manufacturer's recommended schedule.
  • Check for coolant leaks. Leaks at the torch require immediate attention to reduce the potential for electric shock.
  • If your TIG welder has a high-frequency start, watch for erratic performance from the high-frequency feature. When was the last time you checked the gap on the high-frequency points? Check the operator's manual for your specific welder, but remember that this service is best performed by a qualified repairer.

MIG Welde...

Click here to read the rest of the article at BodyShop Business

BodyShop Business is
a Babcox publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874
Advertise      Contact Us      Subscribe      Article Index      Privacy/Terms of Use