Welding Equipment Essentials Hephzibah GA

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program.

Lords Collision Center - We Save Deductibles
(706) 303-1668
1547 Gordon Highway
Augusta, GA
First Vehicle Services-Augusta (Tobacco Road)
(706) 821-2816
2316 Tobacco Road
Augusta, GA
Beattie's Auto Service, Inc.
(706) 736-7351, 001-2004
252 Boy Scout Road
Augusta, GA
Eagle Paint and Body Inc.
(706) 854-8020, 001-2004
5113 Wrightsboro Road
Grovetown, GA
Jiffy Lube
(706) 796-1818
2506 Tobacco Rd
Hephzibah, GA
C&C Automotive
(706) 303-3952
990 Telfair Street
Augusta, GA
A.C. Proctor's Paint & Body, Inc.
(706) 736-3110
3011 Milledgeville Road
Augusta, GA
First Vehicle Services-Augusta (Broad Street)
(706) 821-2816
1568 Broad Street
Augusta, GA
Autozone
(706) 790-6680
2525 Tobacco Rd
Hephzibah, GA
Jiffy Lube
706-796-1818
2506A TOBACCO RD
HEPHZIBAH, GA
Data Provided by:
 

Welding Equipment Essentials

If you expect your welding equipment to last longer and perform better, preventative maintenance is a must.

10/1/2001

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program. To work efficiently, each type of welding unit has specific requirements. Here's a quick checklist:

Plasma Cutters

  • Plasma cutters need an unrestricted flow of clean, dry air to the torch, so be sure to change the regulator/moisture trap filter on a regular basis.
  • Inspect the torch cable periodically to make sure all connections are tight and that the cable the air flows through hasn't been crushed or damaged.
  • Change the consumables in the torch when they're damaged or worn out.

TIG Welders

  • If you have a water-cooled TIG torch, be sure you're using the correct torch coolant. It's also important to change the coolant based on the manufacturer's recommended schedule.
  • Check for coolant leaks. Leaks at the torch require immediate attention to reduce the potential for electric shock.
  • If your TIG welder has a high-frequency start, watch for erratic performance from the high-frequency feature. When was the last time you checked the gap on the high-frequency points? Check the operator's manual for your specific welder, but remember that this service is best performed by a qualified repairer.

MIG Welde...

Click here to read the rest of the article at BodyShop Business

BodyShop Business is
a Babcox publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874
Advertise      Contact Us      Subscribe      Article Index      Privacy/Terms of Use