Welding Equipment Essentials Makawao HI

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program.

Precision Autobody Inc.
(808) 244-0742
900 Eha Street
Wailuku, HI
Auto Glass Maui LLC
808-357-5147
898 Alamuku St
Makawao, HI
Maui County Highway Div Garage
808-572-1053
P O Box 117
Makawao, HI
Quality Performance Repairs, LLC
808-757-0667
P O Box 880892
Pukalani, HI
Maui Transmissions
(808) 573-4724
Makawao, HI
Maui Transmissions
808-573-0600
3411B Old Haleakala Hwy
Pukalani, HI
Napa Auto Parts
(808) 572-7265
Pukalani Terrace Ctr
Makawao, HI
Carquest Auto Parts Stores
(808) 572-8588
1043 Makawao Ave Ste 101
Makawao, HI
Morikawa and Associates LLC
808-877-7929
431a Ulii Dr
Makawao, HI
360 Automotive LLC
808-573-0123
7 HAMIHA ST
Makawao, HI
Data Provided by:
 

Welding Equipment Essentials

If you expect your welding equipment to last longer and perform better, preventative maintenance is a must.

10/1/2001

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program. To work efficiently, each type of welding unit has specific requirements. Here's a quick checklist:

Plasma Cutters

  • Plasma cutters need an unrestricted flow of clean, dry air to the torch, so be sure to change the regulator/moisture trap filter on a regular basis.
  • Inspect the torch cable periodically to make sure all connections are tight and that the cable the air flows through hasn't been crushed or damaged.
  • Change the consumables in the torch when they're damaged or worn out.

TIG Welders

  • If you have a water-cooled TIG torch, be sure you're using the correct torch coolant. It's also important to change the coolant based on the manufacturer's recommended schedule.
  • Check for coolant leaks. Leaks at the torch require immediate attention to reduce the potential for electric shock.
  • If your TIG welder has a high-frequency start, watch for erratic performance from the high-frequency feature. When was the last time you checked the gap on the high-frequency points? Check the operator's manual for your specific welder, but remember that this service is best performed by a qualified repairer.

MIG Welde...

Click here to read the rest of the article at BodyShop Business

BodyShop Business is
a Babcox publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874
Advertise      Contact Us      Subscribe      Article Index      Privacy/Terms of Use