Welding Equipment Essentials Stillwater MN

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program.

R & S Automotive
(651) 317-8401
38 W. Woodlyn Ave
Little Canada, MN
Act's Automotive Repair
(763) 244-8786
620 Lake Street North
Forest Lake, MN
Century Auto Service
(651) 739-2905
6780 Hudson Boulevard
Saint Paul, MN
Safelite Auto Glass
(888) 820-2558
1501 Coulee Rd
Hudson, WI
Auto Max Auto Service Center
(651) 774-6765
847 White Bear Avenue North
Saint Paul, MN
LaMotte & Son Auto Repair
(651) 317-8769
2163 2nd Ave
Newport, MN
Fred's Tire Service & Brakes
(651) 439-0403
14520 60th Street North
Stillwater, MN
Am-Pm Automotive Repair
(651) 426-0462
3696 Scheuneman Road%2C Suite 3
Saint Paul, MN
Holmen Auto Service
(651) 735-1640
47 Century Avenue North
Saint Paul, MN
Lancer Service, Inc.
(651) 224-0267, 001-2004
270 East 8th Street
St. Paul, MN
Data Provided by:
 

Welding Equipment Essentials

If you expect your welding equipment to last longer and perform better, preventative maintenance is a must.

10/1/2001

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program. To work efficiently, each type of welding unit has specific requirements. Here's a quick checklist:

Plasma Cutters

  • Plasma cutters need an unrestricted flow of clean, dry air to the torch, so be sure to change the regulator/moisture trap filter on a regular basis.
  • Inspect the torch cable periodically to make sure all connections are tight and that the cable the air flows through hasn't been crushed or damaged.
  • Change the consumables in the torch when they're damaged or worn out.

TIG Welders

  • If you have a water-cooled TIG torch, be sure you're using the correct torch coolant. It's also important to change the coolant based on the manufacturer's recommended schedule.
  • Check for coolant leaks. Leaks at the torch require immediate attention to reduce the potential for electric shock.
  • If your TIG welder has a high-frequency start, watch for erratic performance from the high-frequency feature. When was the last time you checked the gap on the high-frequency points? Check the operator's manual for your specific welder, but remember that this service is best performed by a qualified repairer.

MIG Welde...

Click here to read the rest of the article at BodyShop Business

BodyShop Business is
a Babcox publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874
Advertise      Contact Us      Subscribe      Article Index      Privacy/Terms of Use