Welding Equipment Essentials Washington DC

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program.
Wagonwork Collision
(571) 210-2515
3406 Jefferson Davis Hwy
Alexandria, VA
Fort Washington Auto Body and Repair
(301) 965-0646
6100 Livingston Road
Oxon Hill, MD
Beltway Auto Care Inc
(301) 909-5947
11844 Coakley Cir
Rockville, MD
Superior Auto Service
(301) 541-3990
12298 Wilkins Ave
Rockville, MD
Certified Auto Repair, Inc.
(301) 364-4827
202 Park Rd
Rockville, MD
AMMCO Marlow heights
(301) 909-5978
3501 Pohanka
Marlow heights, MD
AAMCO
(571) 482-8997
632 S. Pickett St.
Alexandria, VA
Preferred Automotive
(301) 836-1569
12356 Wilkins Avenue
Rockville, MD
County Transmissions Inc
(703) 345-9943
320 Dominion Rd NE
Vienna, VA
Jacob's Autorama Inc.
(301) 202-2979
107 N Stonestreet Ave
Rockville, MD

Welding Equipment Essentials

If you expect your welding equipment to last longer and perform better, preventative maintenance is a must.

10/1/2001

Preventative maintenance is the key to getting the most out of your equipment investment. Like the other gear your metal techs use on a daily basis, your welding and plasma-cutting equipment benefits from a regular maintenance program. To work efficiently, each type of welding unit has specific requirements. Here's a quick checklist:

Plasma Cutters

  • Plasma cutters need an unrestricted flow of clean, dry air to the torch, so be sure to change the regulator/moisture trap filter on a regular basis.
  • Inspect the torch cable periodically to make sure all connections are tight and that the cable the air flows through hasn't been crushed or damaged.
  • Change the consumables in the torch when they're damaged or worn out.

TIG Welders

  • If you have a water-cooled TIG torch, be sure you're using the correct torch coolant. It's also important to change the coolant based on the manufacturer's recommended schedule.
  • Check for coolant leaks. Leaks at the torch require immediate attention to reduce the potential for electric shock.
  • If your TIG welder has a high-frequency start, watch for erratic performance from the high-frequency feature. When was the last time you checked the gap on the high-frequency points? Check the operator's manual for your specific welder, but remember that this service is best performed by a qualified repairer.

MIG Welde...

Click here to read the rest of the article at BodyShop Business

BodyShop Business is
a Babcox publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874
Advertise   •   Contact Us   •   Subscribe   •   Article Index   •   Privacy/Terms of Use